• Skip to main content
  • Skip to header right navigation
  • Skip to site footer
Maker Hacks

Maker Hacks

Ideas, news & tutorials for makers and hackers – Arduino/Raspberry Pi, 3D printing, robotics, laser cutting, and more

  • Home
  • About
  • YouTube
  • Recommendations
  • Contact

budget

You are here: Home / Archives for budget
Cryptocurrency Mining Rig

Building a Cryptocurrency Mining Rig is Easier than You Might Think

Can your PC mine bitcoin? If you are interested in dipping your toe into cryptocurrency mining then fear not - it might be easier than you thought

Read moreBuilding a Cryptocurrency Mining Rig is Easier than You Might Think

Can I replace my iMac with a DIY PC?

Can I replace my 2012 iMac with a DIY PC that is at least as powerful? Can I do it for less than a new iMac would cost me? Will it run MacOSX?

Read moreCan I replace my iMac with a DIY PC?

Adding a GPU with Powered PCIe Risers

Adding a GPU (graphics card) to your PC, but not enough space or full length slots available? a great solution is to use a "Powered PCIe Riser".

Read moreAdding a GPU with Powered PCIe Risers
anet a8 3d printer kit review

Anet A8 for only $155.99

Get the amazing value Anet A8 for only $155.99 Act fast – There are just 10 printers of each plug available (if one runs out just get the other and use any spare plug you have around).

Read moreAnet A8 for only $155.99
Anet A8 build

Anet A8 Review – Budget ($200 or less!) 3D Printer Kit Review

The Anet A8 is a $200 (or less!) 3d printer kit. In this review we answer the question how good could a sub-$200 prusa i3 clone 3d printer kit actually be?

Read moreAnet A8 Review – Budget ($200 or less!) 3D Printer Kit Review
Creality CR-10 3d printer

Creality CR-10 3d printer review – Large format, quality output, at a low price!

Creality CR-10 3d printer. A large format, budget, Chinese, almost pre-built machine for all your large model 3d printing needs. The name will either mean nothing to you, or you will have a mixture of …

Read moreCreality CR-10 3d printer review – Large format, quality output, at a low price!
$300-3d-printers

Best $300 3D Printers – Suggestions for Ultra-Budget 3D Printing $300 and Under

$300 3D printers are apparently all that people are asking about in the Facebook groups so I thought I would write this up to stop having to repeat myself 🙂 Word of warning, all of these printers have …

Read moreBest $300 3D Printers – Suggestions for Ultra-Budget 3D Printing $300 and Under

Is Making an Expensive Hobby?

Is making expensive? Just lately I have had a few people imply I was wasting my money on all this electronics/3d printing shenanigans. But is it really any more expensive or wasteful as anything else? …

Read moreIs Making an Expensive Hobby?

Copyright © 2023 · Maker Hacks · All Rights Reserved · Powered by Mai Theme